IBM 7532 INDUSTRIAL COMPUTER Announcement Letter Number 185-054 dated May 21, 1985 US - Last Revised on May 21, 1985 Brief Description of Announcement, Charges, and Availability The IBM 7532 Industrial Computer is designed for information-handling applications in industrial plant floor environments, where a system more resistant to harsh physical conditions is required. The 7532 is installable inside a standard 19-inch rack. It is based on a high performance Intel 80286 microprocessor, and is equipped with a high capacity (1.2Mb) diskette drive, 512Kb of standard memory, keyboard, clock/calendar with battery backup, ROM based BASIC language, and other advanced features. Customer Letter Section HIGHLIGHTS STANDARD FEATURES o Advanced high-performance Intel 80286 microprocessor o ROM based automatic power on self test of system components o ROM based BASIC language interpreter o 8086 compatible real address mode o Protected virtual address mode o 512Kb of memory o 1.2Mb high capacity diskette drive o Combination fixed disk and diskette adapter o Fixed disk-in-use indicator light (yellow) o System clock/calendar/system configuration storage with battery back-up o Sound system o System reset button o Diskette area cover door with security keylock o Bi-directional keyboard interface o Keyboard o Switchable worldwide power supply with cooling fan o Cooling fan with removable filter o Power-on indicator light (green) o Eight I/O expansion slots with retainer bar to secure feature cards o Socket for Intel 80287 math co-processor o 24-bit addressing o 16-bit data path o Seven-channel direct memory access (DMA) o 16-level interrupt o Three programmable timers OPTIONAL FEATURES o 128Kb Memory Expansion (#0209) o 512Kb Memory Expansion (#0203) o 20Mb Fixed Disk Drive (#6019 or #6045) o Second 1.2Mb High Capacity Diskette Drive (#6038) o 360Kb Dual-sided Diskette Drive (#6039) o 80287 Math Co-processor (#0211) o PC Network Adapter (#0213) o PC Network Cabling Components - Base Expander (#0230) - Distance Kit: Short (#0231), Medium (#0232), Long (#0233) - Cabling Segments: 25-foot (#0234), 50-foot (#0235), 100-foot (#0236), 200-foot (#0237) o Serial/Parallel Adapter (#0215) o Serial Adapter Cable (#0217) o Serial Adapter Connector (#0242) o Prototype Adapter (#0220) o Enhanced Graphics Adapter (#1200) o Graphics Memory Expansion Card (#1201) o Graphics Memory Module Kit (#1203) o Binary Synchronous Communications Adapter (#1204) o SDLC Communications Adapter (#1205) o PC Cluster Adapter (#1206) o PC Cluster Cable Kit (#1207) o Data Acquisition and Control Adapter (#1502) o Distribution Panel (#1504) o General Purpose Interface Bus Adapter (#1503) o Communications Adapter Cable (#2067) o Color/Graphics Monitor Adapter (#4910) o Combination Adapter Cable (#6001) o Combination Adapter II (#6020)* o 128Kb Memory Board for the Combination Adapter II (#6040)* * Available fourth quarter 1985 OPTIONAL ACCESSORIES o Rack Mounting Slides (#6023) o Keyboard Mounting Kit (#6024) o Display Mounting Kit (#6025) o Display Mounting Parts Kit (#6044) DESCRIPTION The IBM 7532 Industrial Computer has been designed to meet industrial environmental conditions. These conditions can be summarized as follows: o extended temperature operation o extended vibration and shock operation o extended voltage transients operation o extended particulates operation The 7532 provides plant floor personnel with a system capable of handling computer applications in the plant floor environment. The 7532 is designed for installation inside a standard 19-inch rack. The standard 19-inch racks must meet EIA standards for 19-inch rack mounting and must comply with RS-310B (ANSI C83.9-1972) dimensional specifications and use the universal mounting rail hole pattern. The IBM 7532 Industrial Computer is based on a high performance 16/24-bit Intel 80286 microprocessor, and is equipped with a high capacity (1.2Mb) diskette drive, keyboard, ROM based BASIC language, clock/calendar with battery backup, diskette area cover door with security keylock, and system reset button. Standard memory is 512Kb. The system may be further expanded to 640Kb with the 128Kb memory expansion or memory board option or up to 3Mb with 512Kb memory options. The system can be further expanded through additional customer setup options. One or two 20Mb Fixed Disk Drives, a second 1.2Mb High Capacity Diskette Drive or a Dual-sided (320/360Kb) Diskette Drive are available. A maximum of two diskette drives and one fixed disk drive, or one diskette drive and two fixed disk drives can be installed in the system unit. These combinations result in direct access storage capacity of up to 41.2Mb. DOS 3.0 supports the 20Mb Fixed Disk Drive and 1.2Mb High Capacity Diskette Drive in the 7532 system. With DOS 3.0, the 1.2Mb diskette drive will also read single- and dual-sided diskettes formatted at 160/180Kb and 320/360Kb capacity, respectively. The Dual-sided Diskette Drive (320/360Kb) option is available for downward diskette portability with the IBM 5531 Industrial Computer and IBM Personal Computers. To fully utilize the 1.2Mb High Capacity Diskette Drive, new diskette media is required. The media is available from the IBM Systems Supplies catalog with the following description: IBM 5.25 Diskette 2HC, double-sided, high capacity, 96 tracks per inch, soft sectored, P/N 6109660. To order diskettes, contact IBM Direct, toll-free via 1-800-IBM-2468. Eight option (feature) slots support feature cards for devices, features, or memory. Six of the slots support either the advanced 16-bit or 8-bit option cards. Two support 8-bit option cards only. However, the 7532 uses one 16-bit slot for the standard combination fixed disk and diskette drive adapter. The result is seven available expansion slots. A retainer bar is provided to secure the feature cards in-place. Included are a cooling fan for the world-wide power supply, and a cooling fan with removable filter for the system unit features. The 7532 also includes a diskette area cover door with security keylock, which, when locked by the user, prevents initialization of the system, and entry of command/data from the keyboard. The keyboard offers commonly used data and word processing functions along with separate typewriter and numeric keypads. Key-locations enhancements and mode indicators (Cap Lock, Numeric Lock, Scroll Lock) improve keyboard usability. Special symbols may be accessed with a combination of keys. Depending on the application program, from 10 to 40 special function keys may be supported. The keyboard is attached to the 7532 via a ten-foot coiled cable, permitting a variety of workspace configurations. An optional Keyboard Mounting Kit (#6024) is offered to install the keyboard in a standard 19-inch rack. An optional Display Mounting Kit (#6025) provides all necessary hardware components for mounting the IBM 7534 Industrial Graphics Display in a standard 19-inch rack that is 22-inch to 30-inch in depth. OPTIONAL FEATURES 512KB MEMORY EXPANSION (#0203): Adds memory above 1Mb, in 512Kb increments. Up to five options may be plugged into the I/O expansion slots of the system unit to provide a total of three megabytes of primary storage. Performance characteristics are the same as other 7532 user memory. Note: This option may not be used for address storage from 512Kb to 640Kb. The memory range from 640Kb to 1Mb is reserved for system functions. Each increment requires one 16-bit expansion slot. 128KB MEMORY EXPANSION (#0209): Expands memory from 512Kb to 640Kb. Performance characteristics are the same as other 7532 user memory. Only one #0209 may be installed. It requires a 16-bit expansion slot. Limitation: Cannot be installed with 128Kb Memory Board for the Combination Adapter II (#6040). 20MB FIXED DISK DRIVE (#6019 OR #6045): Two optional fixed disk drives may be installed on the 7532, providing a total of 40Mb of fixed disk storage capacity. Space and power are provided in the system unit for the drive(s). All fixed disk or diskette drives use the standard combination fixed disk and diskette drive adapter in the system unit. A dedicated landing zone for the read/write heads is available to protect the file and its contents during shipping, movement, or storage. The number of fixed disk drives and diskette drives must not exceed three. No more than two fixed disk drives can be installed in a system unit. #6019 is a customer setup drive. #6045 is a plant-installed drive. Characteristics: o 20Mb of storage o 512 bytes per sector o 17 sectors per track o 615 tracks per surface (cylinders) o 80 ms average access time o Four surfaces o 3600 RPM o 5M bit per second transfer rate o Dimensions: - Height 82.55 mm (3.25 inches) - Width 146.05 mm (5.75 inches) - Depth 203.20 mm (8.00 inches) - Weight 2.3 Kg (5.1 lb) HIGH CAPACITY DISKETTE DRIVE (#6038): This is a half-high, 5-1/4-inch, dual-sided drive with 1.2Mb storage capacity. Space and power have been provided in the system unit for up to two drives. The drive is fully self-contained and consists of a spindle drive system, a read positioning system and a read/write/erase system. One of these drives is standard in the 7532. An optional second drive may be installed in the system unit adjacent to the first if the space is not occupied by another second diskette drive. Both drives use the standard combination fixed disk and diskette drive adapter in the system unit. The number of fixed disk drives and diskette drives must not exceed three. The drive uses the new 96-TPI, high density media. In addition, it will read or write 48-TPI, single- or dual-sided media written for the IBM 5531 Industrial Computer and IBM Personal Computers, giving a high level of compatibility with existing applications. However, once the 48-TPI media has been written in this drive, it may only be read by a high capacity diskette drive. Characteristics: o 1.2Mb storage o 512 bytes per sector o 15 sectors per track o 96 tracks per inch o Two sides o 80 tracks per side o 360 RPM o Supports 300K and 500K bits/sec data transfer rate o 94 ms average access time in 96-TPI mode o Dimensions: - Height 42.9 mm (1.7 inches) - Width 149.0 mm (5.9 inches) - Depth 202.1 mm (8.0 inches) - Weight: 1.6 Kg (3.5 lb) DUAL-SIDED DISKETTE DRIVE (#6039): This diskette drive permits the exchange of 320/360Kb diskette media between the 7532, the IBM 5531 Industrial Computer, and IBM Personal Computers. It is a half-high, 5-1/4-inch, dual-sided drive with a 320/360Kb storage capacity. Space and power for one drive have been provided in the system unit. The drive is fully self-contained and consists of a spindle drive system, a read positioning system, and a read/write/erase system. This drive is installed in the system unit adjacent to the standard high capacity diskette drive if the space is not occupied by another second diskette drive. This drive uses the standard combination fixed disk and diskette drive adapter in the system unit. The number of fixed disk drives and diskette drives must not exceed three. Characteristics: o 320/360Kb of storage o 512 bytes per sector o 8/9 sectors per track o Two sides o 91 ms average access time o 40 tracks per surface o 48 tracks per inch o 300 RPM o Transfer rate of 250K bits/second o Dimensions: - Height 42.9 mm (1.7 inches) - Width 149.0 mm (5.9 inches) - Depth 202.1 mm (8.0 inches) - Weight: 1.6 Kg (3.5 lb) MATH CO-PROCESSOR (#0211): A high performance numeric 80287 processor extension with floating point, extended integer, and BCD data types, compatible with the Intel 8087 Math Co-Processor. When installed, the system fully conforms to the proposed IEEE Floating Point Standard and is an excellent facility for high-performance numeric processing. Only one #0211 can be installed in a system unit. IBM PC NETWORK ADAPTER (#0213): The IBM PC Network is a low cost, broadband, local area network. It provides a reliable, low maintenance network using standard 75 ohm coaxial cable (CATV compatible) and standard broadband components. The network uses carrier sense multiple access/collision detect (CSMA/CD) protocol to transmit data at 2 million bits per second. The network consists of the IBM 5178 PC Network Translator Unit which provides single channel frequency translation for the network, the IBM PC Network Adapter (#0213) which attach IBM Industrial and Personal Computers to the network, and eight IBM PC Network Cabling Components which may be used to attach up to 72 IBM Industrial and Personal Computers within a 1,000-foot radius of the translator unit. The IBM 5178 PC Network Translator Unit provides fixed frequency translation for the IBM PC Network. One translator unit is required for each network. The translator unit is supplied with a separately packaged 120-volt transformer which plugs into a standard grounded electrical outlet. The translator unit has a connector assembly for attaching up to eight IBM Industrial or Personal Computers within a radius of 200 feet (cable segments may be purchased separately). The translator also has an expansion port for attaching the IBM PC Network Base Expander (#0230), which permits attachment of up to 64 additional Industrial or Personal Computers to the network, for a total of 72. The 5178 environmental specifications are lower than those of the 7532. Consequently, the 5178 must be installed in a location where the environmental conditions are similar to those of an office environment. The IBM PC Network Adapter is a feature card that plugs into each IBM Industrial or Personal Computer in the network. It requires one expansion slot of either type. It is supplied with a three-meter (9-foot) attachment cable which can be connected directly to, or within 200 feet of the IBM PC Network Translator Unit. The IBM PC Network Cabling Segments are used to extend the distance up to 200 feet. The optional IBM PC Network Cabling Components contain a variety of preassembled wires and connectors that permit installation of a variety of network topologies. They are designed to extend the functional capabilities of the network. These cabling components can be used to increase the maximum number of attached stations from 8 to 72, and to increase the maximum distance of coverage from a radius of 200 feet to a radius of 1,000 feet. The cable component options which provide for end-to-end connection, include a Base Expander, three Expansion Kits, and four Cable Segments preassembled from standard CATV components. Standard F connectors are used to connect cable components. The IBM PC Network Base Expander (#0230) is required to grow the network to more than eight IBM Industrial or Personal Computers or more than a 200-foot radius from the translator unit. The base expander is a prerequisite for the attachment of up to eight Short, Medium, or Long Distance Kits in any combination. Each distance kit can attach up to eight IBM Industrial or Personal Computers. In addition, the medium and long distance kits extend the network by 400 feet and 800 feet, respectively. In combination with cabling segments, the short, medium, and long distance kits can extend the network up to a 1,000-foot radius from the translator unit. SERIAL/PARALLEL ADAPTER (#0215): Provides a serial port and a parallel port. The serial portion is fully programmable and supports asynchronous communications from 50 to 9600 baud. The back of the adapter has a nine-pin D-shell connector that is classified as an RS232-C port. When the optional 10-foot Serial Adapter Cable (#0217) or 10-inch Serial Adapter Connector (#0242) is connected to the adapter, the 25-pin end of the cable or connector has all the signals of a standard EIA RS232-C interface. The parallel portion of the adapter provides the ability to attach various devices that accept eight bits of parallel data. The parallel port is provided by a 25-pin, D-shell connector. One or two Serial/Parallel Adapters may be installed. Each requires one expansion slot of either type. Note: This adapter does not support current loop operation. PROTOTYPE ADAPTER (#0220): This adapter is 4.8 inches high by 13.12 inches long. Two card edge tabs, one 2 by 31 positions and one 2 by 18 positions, provide all system control signals and voltages. No components are shipped with this card. The adapter contains a voltage bus (+5 Vdc) and a ground bus (0 Vdc). Each bus borders the adapter with the ground bus on the component side and the voltage bus on the pin side. A system interface (wiring only) is also provided with a space for a jumper to specify whether the device has an 8- or a 16-bit data bus. This adapter also accommodates a D-shell connector from 9 to 37 positions. A recommended system interface logic diagram is available along with a list of recommended components to be used to interface custom logic to the 7532. Up to five Prototype Adapters can be installed in a system unit. Each requires a 16-bit expansion slot. ENHANCED GRAPHICS ADAPTER (#1200): Provides support for the new IBM 7534 Industrial Graphics Display and enhanced support for the IBM 5532 Industrial Color Display. It requires one expansion slot of either type. The IBM Graphics Memory Expansion Card (#1201) expands the IBM Enhanced Graphics Adapter's 64Kb memory to 128Kb and increases the color range for 640 x 350 graphics from four colors to 16 colors. The IBM Graphics Memory Module Kit (#1203) expands the expansion's card memory to 256Kb providing additional graphics function. The Enhanced Graphics Adapter: o Supports the IBM 5532 Industrial Color Display or the new IBM 7534 Industrial Graphics Display. o Allows full 16-color graphics with the IBM 5532 Industrial Color Display in either 320 x 200 medium definition graphics or 640 x 200 high definition graphics modes. o Provides 640 x 350 support in up to 16 colors for graphics on the new IBM 7534 Industrial Graphics Display. o Provides high quality (8 x 14 character box) text in color on the new IBM 7534 Industrial Graphics Display. o Allows users to select under program control from a palette of 64 colors when connected to the new IBM 7534 Industrial Graphics Display. o Provides 64Kb graphics memory on the IBM Enhanced Graphics Adapter expandable to 128Kb with the Graphics Memory Expansion Card. o Expands graphics memory to 256Kb with the Graphics Memory Module Kit. This added memory may be used to support smooth scrolling, panning (scanning sequentially through graphics memory), and additional pages of graphics data. o Allows compatibility modes to execute programs written for the IBM Color/Graphics Monitor Adapter with the IBM 5532 Industrial Color Display. Composite video support for attaching analog monitors or TV sets is not provided. o Allows RAM-resident character generator to be loaded from user programs allowing any set of 256 characters to be incorporated into applications. o Allows character space expansion to 512 with the IBM Graphics Memory Expansion Card and to 1024 with the IBM Graphics Memory Module Kit. o Allows character box sizes up to 32 dots high and 8 dots wide. BINARY SYNCHRONOUS COMMUNICATIONS ADAPTER (#1204): Provides an EIA RS232-C interface. It is compatible with the IBM 5531 Industrial Computer, IBM 7531 Industrial Computer, IBM Personal Computer, IBM Personal Computer XT, IBM Portable Personal Computer, and Personal Computer AT. A maximum of two BSC Adapters may be installed. Only one BSC Adapter may be installed if an SDLC Communications Adapter (#1205) is installed. Each adapter requires one expansion slot of either type. SDLC COMMUNICATIONS ADAPTER (#1205): Provides an EIA RS232-C interface. It is compatible with the IBM 5531 Industrial Computer, IBM 7531 Industrial Computer, IBM Personal Computer, IBM Personal Computer XT, IBM Portable Personal Computer, and IBM Personal Computer AT. Only one SDLC Adapter may be installed. It requires one expansion slot of either type. COMMUNICATIONS ADAPTER CABLE (#2067): Allows the user to connect the Binary Synchronous Communications Adapter (#1204) or the SDLC Communications Adapter (#1205) to a modem via a plug at the rear of the 7532. The cable is double shielded and approximately 3m (10 feet) long. A wrap connector is provided to test the cable. PC CLUSTER ADAPTER (#1206): To connect the 7532 in a clustered multi-user configuration, consisting of other 7532s, IBM 7531 Industrial Computers, IBM 5531 Industrial Computers, and IBM Personal Computers. This option supports up to 64 computers in a cluster (actual number is dependent on performance characteristics). Each computer in the cluster beyond the first two requires an additional PC Cluster Cable Kit (#1207). The adapter requires one expansion slot of either type. DATA ACQUISITION AND CONTROL ADAPTER (#1502): An analog and digital I/O card that can be plugged directly into the system unit. This option can be used in a scientific/industrial laboratory setting to control processes, monitor transducers (flow, pressure, temperature, etc.), and automate electronic testing. It requires one expansion slot of either type. The IBM Data Acquisition and Control Adapter Distribution Panel (#1504) is an optional feature that provides easy access to the I/O signals, voltages, and grounds of the IBM Data Acquisition and Control Adapter. The distribution panel is connected to the adapter by a shielded cable. The distribution panel is a printed circuit board with four barrier-type screw terminal strips for a total of 88 terminations. A shielded flat cable with a 60-pin connector is permanently attached to the board. The cable and terminal board assembly is housed in a metal enclosure that is slotted to allow user cabling to enter or exit. The cable is approximately 34 inches long. Up to four IBM Data Acquisition and Control Adapters can be attached to the 7532. The Adapter has: o Four analog input channels (12-bit resolution) o Two analog output channels (12-bit resolution) o 16-channel digital input port o 16-channel digital output port o Programmable sampling rates provided by a 32-bit timer o Event counter, programmable rate generator, or programmable time delay provided by a 16-bit user timer/counter The Distribution Panel has: o Screw terminals provided to attach devices to the distribution panel o Multiple grounds for twisted pair terminations o Shielded construction to minimize noise interference. Application areas that may be addressed with the adapter include: o Chromatography o Electrochemistry o Energy management o Electronic testing o Process control o Data logging o Robotics Some parameters commonly monitored or controlled include: o Pressure o Flow o Temperature o Displacement o Voltage o Light intensity o Rotational speed Some examples of instruments or devices that may utilize the adapter are: o Chromatographs o Spectrophotometers o Pressure gauges o Relay controls o Thermocouples o Gas analyzers o Humidity sensors o Valve actuators o Level gauges o Load cells o Conductivity cells o pH meters GENERAL PURPOSE INTERFACE BUS ADAPTER (#1503): Provides an interface between the 7532 and the IEEE-488 General Purpose Interface Bus (GPIB), allowing control of multiple devices or instruments (such as plotters, multimeters, and disk drives). Up to four GPIB Adapters can be installed in a system unit. Each adapter requires one expansion slot of either type. The IBM GPIB Adapter can perform as a controller, a talker, or a listener with compatible devices. The IBM GPIB Adapter also provides capabilities for data transfer between work stations, and the connection of several computers for sharing of instruments or peripheral I/O devices. The IBM GPIB Adapter is designed to the ANSI/IEEE-488 standard, including the 488A-1980 supplement, and: o Supports up to 14 devices or instruments o Provides a direct memory access data rate of up to 300Kb/second o Provides a programmed I/O data rate of up to 20Kb/second o Allows user selection of direct memory access channels o Allows user to select interrupt level COLOR/GRAPHICS MONITOR ADAPTER (#4910): To attach a color display to the 7532. Either a "direct-drive RGB" signal or a "composite" video signal can be selected. The display can be a direct-drive IBM 5532 Industrial Color Display, IBM 7534 Industrial Graphics Display, a video monitor, or, through a customer-supplied RF modulator, a standard TV set. Either a color or black and white monitor or TV can be attached. 16 foreground and 8 background colors are supported in text (character) mode. This attachment also provides support for 4-color medium definition graphics (320 dots horizontal, 200 dots vertical) and black and white high-definition graphics (640 dots horizontal, 200 dots vertical). 256 characters are available in "text" mode, 128 in medium or high definition graphics. The adapter provides 16Kb of built-in memory to store multiple display screen contents and supports a customer-supplied light-pen. It requires one expansion slot of either type. COMBINATION ADAPTER II (#6020) (AVAILABLE FOURTH QUARTER 1985): Provides the 7532 with four main functions: an asynchronous communications interface, a parallel printer interface, a programmable timer, and a thermal sensor interface. The adapter requires one 16-bit expansion slot. The asynchronous communications interface is fully programmable and supports asynchronous communications only. All of the specifications of this interface match those of the Serial/Parallel Adapter (#0215). In addition, the serial interface can be configured to support an RS422 interface. The cable interface to the asynchronous communications port is via a 9-pin connector at the rear of the system unit. The Combination Adapter Cable (#6001) is required to convert the 9-pin Asynchronous Communications port of the Combination Adapter II to a 25-pin "D" shell, male type connector for attachment to an external modem or other asynchronous devices. The cable is double shielded and approximately 3m (10 feet) long. A wrap connector is provided to test the cable. The parallel printer interface is specifically designed to attach printers with a parallel interface. All of the specifications of this interface match those of the Serial/Parallel Adapter (#0215). The programmable timer has a counter resolution of 4/1,000 of a second. The thermal sensor interface connects to a thermal sensor inside the system unit and allows the system processor to sense when the system unit is over its specified temperature range. A bit in the sensor port is set by the thermal sensor to indicate to the system software (DOS) that the system unit is over its specified temperature range. 128KB MEMORY BOARD FOR THE COMBINATION ADAPTER II (#6040) (AVAILABLE FOURTH QUARTER 1985): Plugs into the Combination Adapter II (#6020) and expands the memory from 512Kb to 640Kb without requiring an expansion slot. Performance characteristics are the same as other 7532 user memory. Only one 128Kb Memory Board may be installed on a Combination Adapter II. Limitation: Cannot be installed with 128Kb Memory Expansion (#0209). OPTIONAL ACCESSORIES RACK MOUNTING SLIDES (#6023): Used to install the 7532 and the Keyboard Mounting Kit (#6024) in a standard 19-inch rack. The slides adjust in length from 56 cm (22 inches) to 76 cm (30 inches). KEYBOARD MOUNTING KIT (#6024): Used to mount the keyboard in a standard 19-inch rack. The kit requires the Rack Mounting Slides (#6023). DISPLAY MOUNTING KIT (#6025): Used to mount the IBM 7534 Industrial Graphics Display in a standard 19-inch rack that is 22-inch to 30-inch in depth. #6025, in combination with the Display Mounting Parts Kit (#6044) and a new display screen, can also be used to rack-mount the IBM 5532 Industrial Color Display. The new 5532 screens are the Shaded Screen Cover (#6026), the Optically Coated Glass Cover (#6027) or the Clear Screen Cover (#6041). PUBLICATIONS The system will be shipped with two manuals: o IBM 7532 Industrial Computer Operator's Guide o IBM 7532 Industrial Computer Installation and Setup Manual The following manuals are available for purchase: o IBM 7531/7532 Industrial Computer Technical Reference Manual System Unit (#6032) o IBM 7531/7532 Industrial Computer Maintenance Information Manual (#6033) o IBM Industrial Computer Technical Reference Options and Adapters (#6035) o IBM Personal Computer BASIC Reference Manual Version 3.0 (#1132) SCHEDULE Orders for the 7532 will be accepted immediately. First customer shipment is planned for third quarter 1985. Multiple quantity orders are subject to an extension of schedules. TECHNICAL INFORMATION SYSTEM UNIT o INTEL 80286 microprocessor o 6.0 MHz clock speed o 24-bit addressing o 16-bit data path o 64Kb ROM - Access time - 150ns - Cycle time - 355ns o Dimensions: - Depth 513.4 mm (20.2 in) - Width 436.8 mm (17.2 in) - Height 221.0 mm (8.7 in) o Weight: - 21.3 Kg (47 lbs.) SPECIFIED OPERATING ENVIRONMENT o Electrical: - 192 watt power supply - AC Operating Voltages: . 90-137V, 50-60 Hz . 180-259V, 50-60 Hz - Power line lightning surges of +/- 2500 volts, as outlined in FCC Docket 19528 - Part 68 o Air Temperature: - System on: 0 degrees to 50 degrees C (32 degrees to 120 degrees F) - System off: 0 degrees to 55 degrees C (32 degrees to 131 degrees F) o Relative Humidity: - 8% to 80% non-condensing o FCC Class A o Particulates Contaminants Filtering: - Suspended particulates: 500 micrograms per cubic meter - Benzene soluble organics: 30 micrograms per cubic meter - Settleable particulates: 1500 micrograms per square centimeter for 30 days o Shock: - 0.5G at 10 millisecond duration o Vibration: - 5 to 17 Hz at 0.005 inches double amplitude displacement - 17 to 200 Hz at 0.07G peak - 200 to 500 Hz at 0.036G peak o BTU Output: 1229 BTU/Hr COMPATIBILITY The following hardware products are supported on the 7532: o IBM 5532 Industrial Color Display o IBM 7534 Industrial Graphics Display o IBM 5178 PC Network Translator Unit* * See feature #0213 under "Special Features" above for 5178 environmental considerations. SECURITY, AUDITABILITY, AND CONTROL The 7532 can be used and managed so as to limit the risk of unintended modification, destruction, or disclosure of sensitive data. User management is responsible for evaluation, selection, and implementation of security features, for administrative procedures, and for appropriate controls in application systems. If sensitive data is sent over external communication facilities, user management may wish to pursue the application of cryptography. PLANNING INFORMATION CUSTOMER RESPONSIBILITY: The customer is responsible for unpacking and installing system components and options per the installation instructions provided. INSTALLABILITY: The keyboard is plugged directly into the system unit. The display and printer are connected via option adapters installed in the system expansion slots. Once turned on, the system unit automatically runs a power-on self test to verify system readiness. The system unit keylock must be unlocked to complete this self test. If a failure is found, an instruction will appear on the screen. If the test is successfully completed, the system attempts to load an operating system (such as DOS) from the first diskette drive. If that drive does not supply the program, the system tries the first fixed disk. If this operation is not completed, the BASIC Interpreter is made ready, identified on the screen, and the system is available for use. LIMITATIONS: Other IBM 5531 Industrial Computer options, adapters, or devices not specifically listed or supported by the 7532 are not supported. Some of these non-supported items include: o 64Kb Memory Module Kit (#1003) o 64/256Kb Memory Expansion Option (#1013) o 5531 Keyboard o Asynchronous Communications Adapter (#2074) o Binary Synchronous Communications Adapter (#2075) o SDLC Communications Adapter (#2090) o 10Mb Fixed Disk Drive (#2500) o Fixed Disk Adapter (#2501) o 5-1/4" Diskette Drive Adapter (#3780) o 5-1/4" Dual-sided Diskette Drive (#3810) o XT/370 Option Kit (#1509) o Combination Adapter (#6000) o Keylock Option Kit (#6002) PREREQUISITES: The 7532 requires a video display adapter and device for display output. It is powered by a standard 115/230 volt, 50 Hz or 60 Hz power source (voltage can be switched by user). IBM Personal Computer DOS 3.0 is required. DOS 3.1 is required for the IBM PC Network. PACKAGING: The system unit, keyboard, and options are packed in separate cartons. An additional carton contains the power cord, the IBM 7532 Industrial Computer Installation and Setup Manual, and the IBM 7532 Industrial Computer Operator's Guide. TECHNICAL ASSISTANCE Customers who have signed an IBM Industrial Computer Volume Procurement Amendment (VPA) and have ordered twenty or more IBM 7532 Industrial Computers may designate from one to three technical coordinators who may contact the Personal Computing Assistance Center (PCAC) for usage assistance. The usage assistance is available for the contract period. Customer technical coordinators may participate in an education program administered by the PCAC. The education may be self-study or conducted in a classroom at a PCAC-selected location. CHARGES, TERMS, AND CONDITIONS TERMS AND CONDITIONS CUSTOMER SETUP: The 7532 and its options are customer setup (CSU). CSU allowance is one day. Detailed setup instructions are included with each machine and option. Setup service is available from the IBM National Service Division at IBM hourly rates and minimums, or by a Contract Support Service (CSS) Agreement. MACHINE GROUP: A IBM HOURLY SERVICE RATE CLASSIFICATION: 2 WARRANTY PERIOD: One year for the 7532 and all optional features except the Prototype Adapter (#0220) which is one year, unless this feature is modified, at which time warranty provisions are terminated, and three months for the following accessories: o Rack Mounting Slides (#6023) o Keyboard Mounting Kit (#6024) o Display Mounting Kit (#6025) o Display Mounting Parts Kit (#6044) During the 7532 warranty period, warranty periods for optional features which are less than one year will be extended to coincide with the expiration of the 7532 warranty. Optional features which are installed subsequent to the 7532 installation, such that their warranty period extends beyond that of the 7532, will assume their normal warranty. WARRANTY SERVICE: IBM On-site Repair (IOR). MAINTENANCE SERVICES: In the industrial environment, IBM will provide on-site warranty and maintenance service for the failing machine at the customer's central facility under the terms and conditions of the Agreement for Purchase of IBM Machines or IBM Maintenance Agreement as amended by a revised Amendment for Central Facility Maintenance Service (Z125-3333-01). The revised Amendment for Central Facility Maintenance Service, included in Product Announcement 185-XXX, will be available in Mechanicsburg by June 17, 1985. Its supplement (Z125-3334-00) is not revised and is available in Mechanicsburg. Note: Customers should be aware of their specific responsibilities as they relate to central facility service. In the office environment, IBM will provide on-site warranty and maintenance service for the failing machine at the machine's operational location under the terms and conditions of the Agreement for Purchase of IBM Machines or IBM Maintenance Agreement. The 7532 maintenance charges do not include the 20Mb Fixed Disk Drives (#6019 and #6045). All other announced features are included in the system unit maintenance charge. The customer must ensure that the system unit is unlocked when presented for service. HOURLY SERVICE: Hourly service may be obtained by calling the IBM Service/Exchange Communication Center's toll-free number (800) 428-2569. The S/ECC will give the customer instructions on how to obtain hourly service. SELF SERVICE: In addition to the IBM service offerings, the customer may purchase the Maintenance Information Manual which will enable the customer to isolate a problem to an under-the-cover field replaceable unit (FRU). VOLUME PROCUREMENT: The 7532 is included in the IBM Industrial Computer Volume Procurement Amendment (VPA) exhibit. The 7532 may be substituted for other Category A machines. For details, contact your IBM marketing representative. SPECIAL BID PROVISIONS: Special bid provisions apply. The 7532 is available under Category A of all Industrial Computer special bid contracts with discounts, terms and conditions consistent with the Industrial Computer Volume Procurement Amendment (VPA) Exhibit. EDUCATIONAL ALLOWANCE: An educational allowance of 20% is available to qualifying institutions. Qualifying customers may choose volume procurement discounts or educational allowance but not both. TESTING ALLOWANCE: None. FINANCING: IBM Credit Corporation term leases and installment payment plans are available. CHARGES Single Unit Model/ Purchase Feature Price 7532 System Unit/ Keyboard 041 $6,370 Memory Expansion 512Kb 0203 1,125 128Kb 0209 350 20Mb Fixed Disk Drive Customer Setup 6019 1,695 Plant Installed 6045 1,475 Diskette Drive High Capacity 6038 650 Dual-sided 6039 425 Math Co-processor 0211 375 IBM PC Network, Adapter 0213 695 Base Expander 0230 59 Distance Kit Short 0231 39 Medium 0232 79 Long 0233 89 Cabling Segments 25-foot 0234 29 50-foot 0235 39 100-foot 0236 59 200-foot 0237 99 Serial/Parallel Adapter 0215 150 Serial Adapter Cable 0217 65 Prototype Adapter 0220 35 Serial Adapter Connector 0242 35 Enhanced Graphics Adapter 1200 524 Graphics Memory Expansion Card 1201 199 Graphics Memory Kit Module 1203 259 BSC Adapter 1204 240 SDLC Adapter 1205 240 PC Cluster Adapter 1206 340 PC Cluster Cable Kit 1207 110 DAC Adapter 1502 1,275 Distribution Panel 1504 245 GPIB Adapter 1503 395 Communications Adapter Cable 2067 65 Color/Graphics Monitor Adapter 4910 244 Combination Adapter Cable 6001 75 Combination Adapter II 6020 450 128Kb Memory Board 6040 415 Annual Minimum Maintenance Charges Model/ IOR Machine Feature #9798 7532 041 $420 6019 138 6045 138 Note: For CFM service, the minimum number of machines for each service request is one. The Additional Maintenance Charge Factor is one half hour. Accessory Prices Single Unit Purchase Feature Price Rack Mounting Slides 6023 $ 47 Keyboard Mounting Kit 6024 180 Display Mounting Kit 6025 350 Display Mounting Parts Kit 6044 4 Publication Prices Single Feature Copy Number Price Technical Reference System Unit 6032 $ 65 Maintenance Information Manual 6033 295 Technical Reference Options and Adapters 6035 295 Operator's Guide 6036 50 Installation and Setup 6037 30 BASIC Version 3.0 Reference Manual 1132 40 Please contact your IBM marketing representative should you require additional information.