GEARBOX Model 800 Industrial Computer Announcement Letter Number ZG89-0248 dated October 24, 1989 Europe Middle East Africa - Last Revised on May 8, 1990 Brief Description of Announcement, Charges, and Availability Customer Letter Section +---------------------------------------------------------------+ | 89/10/24 | | IBM PRODUCT INFORMATION | | IBM PRODUCT INFORMATION | | IBM PRODUCT INFORMATION | +---------------------------------------------------------------+ | | | All European, Middle Eastern and African Countries. | +---------------------------------------------------------------+ | This document is provided as general customer information | | only. IBM products and services which are announced and | | available in your country can be ordered under the applicable | | standard agreements, terms, conditions and prices in effect | | at the time. For further information please contact your | | local IBM representative. | +---------------------------------------------------------------+ ================================================================= ZG89-0248 GEARBOX Model 800 Industrial Computer The GEARBOX (TM) Model 800 Industrial Computer is a member of the family of GEARBOX industrial computer products. This newest member of the GEARBOX product line offers significant improvements to processor speed and power and to disk file capacity and access time, while providing a higher level of integrated functions in a full Micro Channel (TM) system. The GEARBOX Model 800 is designed specifically to operate in demanding factory floor or other industrial requirements, in a wide range of applications, including distributed and stand-alone large and small cell control, production monitoring, quality monitoring and control, and other applications where high availability under difficult environments is important. Panel and rack mounting are available. (TM) Trademark of International Business Machines Corporation GENERAL AVAILABILITY Planned General Availability Date is March 1990. PRODUCT NUMBER Description M/T Model Feature # P/N -------------------- ---- ----- --------- --------- IBM GEARBOX Model 800 7568 040 15F8563 @ IBM GEARBOX Model 800 7568 150 15F8565 @ Features -------- Battery, Nicad (Internal) 6221 15F8612 Disk Module (with Adapter Card) 6222 15F8605 120 MB Disk Drive 6223 15F8606 16 Bit Micro Channel (TM) Adapter 6224 57F2543 @ 16 Bit Micro Channel (TM) Video Adapter 6225 15F8609 1.44 MB Diskette Drive (Slim-line) 6229 15F8528 Setup and Service Device 6230 33F8915 External Voltage Module (24 V Input) 6231 15F8613 External Voltage Module (48/60 V Input) 6528 33F7109 Card Shroud (Machine Type 7568) 6530 15F8614 80387 Math Co-Processor (25 MHz)(Industrial) 6532 15F8607 Publications ------------ Contact your local Marketing Representative for availability of the actual translated publication. Maintenance Information (U.S. Engl.) 6226 15F8611 Maintenance Information (German) 6232 33F8920 Maintenance Information (French) 6233 33F8921 Maintenance Information (Italian) 6234 33F8922 Maintenance Information (Spanish) 6235 33F8923 Technical Reference (U.S. English) 6227 33F7324 Technical Reference (German) 6236 33F8924 Technical Reference (French) 6237 33F8925 Technical Reference (Italian) 6238 33F8926 Technical Reference (Spanish) 6239 33F8927 Install. and Oper. Guide (U.S. Engl.) 6228 15F8610 Install. and Oper. Guide (German) 6520 33F8928 Install. and Oper. Guide (French) 6521 33F8929 Install. and Oper. Guide (Italian) 6522 33F8930 Install. and Oper. Guide (Spanish) 6523 33F8931 European Ship Groups Feature # Group B/M No. ---------------- --------- ------------- German 6524 33F8932 French 6525 33F8933 Italian 6526 33F8934 Spanish 6527 33F8935 English (U.S.) 6535 33F9071 Language Support Keyboards Feature # Group B/M No. ---------------------------- --------- ------------- Arabic 6377 1394971 Belgian 6378 1394953 Danish 6380 1394955 Dutch 6388 1394962 English (U.K.), ID # 166 6381 1394968 English (U.S.)- IBM Logo (w/cable) 6382 1394946 @ French, ID # 189 6383 1394956 German 6384 1394958 Hebrew 6385 1394970 Italian, ID # 141 6386 1394959 Norwegian 6389 1394963 Portuguese 6390 1394964 Spanish Speaking, ID # 171 6391 1394965 @ Swedish/Finnish 6392 1394966 Swiss-German/French 6393 1394967 HIGHLIGHTS o Micro Channel (TM) Architecture with a 16/32 Bit Bus o Intel 80386 Processor (25 MHz), with 32 KB of Cache Memory o 4 or 8 MB Base Memory Standard (Model Dependent), Expandable to 8 MB on the Processor Card (All Error Correcting Code Memory) o 120 MB Small Computer Systems Interface (SCSI) Disk Drive with 0.5 MB of DASD Cache Memory on the Disk/Diskette Adapter Card (Standard on the Model 150) o Supported by PC DOS (3.30/4.0) and OS/2 (R) (Standard Edition (SE) 1.1/1.2 and Extended Edition (EE) 1.1/1.2) o Battery Back-Up, with Orderly Shutdown Capability o 300 Watt Power Supply with DC Voltage Start-Up/Operation Capability o Integrated VGA Graphics, Serial/Parallel Ports, and Keylock o Worldwide Support with Selected Languages and Keyboards (TM) Trademark of International Business Machines Corporation. (R) Registered Trademark of International Business Machines Corporation. DESCRIPTION BASE SYSTEM The GEARBOX Model 800 provides a major step forward in the world of rugged, high-availability industrial computers. As a member of the GEARBOX family, the Model 800 carries on the valued reliability and availability in demanding environments that characterize the product line. In addition, the GEARBOX Model 800 brings a new level of IBM performance and flexibility to industrial applications, including support of the IBM PLANT FLOOR SERIES Distributed Automation Edition products and related application programs. The new system uses the IBM Personal System/2 (R) (PS/2 (R)) Micro Channel architecture and a 16/32 bit bus enhance overall system capabilities, and provide for compatibility with selected features available from the broad and growing list of PS/2 functions and applications. Integration of many functions on the standard system cards leaves a higher number of slots available for customer use (up to 7 on the Model 040). The GEARBOX Model 800 is based on an Intel 80386 microprocessor, operating at 25 MHz, and supports an optional 80387 Math Co-Processor. The base memory is 8 MB on the model 150, or 4 MB (expandable to 8 MB) on the model 040. In addition the Model 800 will support the 0-16 MB Extended Memory Adapter (#6345). All memory is Error Correcting Code (ECC). Performance is further enhanced through 32 KB of Cache Memory on the Processor Card, and a 120 MB SCSI Disk Drive with 23 ms access time, and 0.5 MB of DASD Cache Memory on the Disk/diskette Adapter Card. A second 120 MB Disk Drive is an optional feature. The Disk/Diskette Adapter Card also contains an external SCSI interface for customer use. Use of this interface requires that the customer provide a software device driver for interface to the intended operating system. No such software driver is provided with the system The GEARBOX Model 800 is supported by IBM PC DOS (3.30 and 4.0) and OS/2 (SE 1.1/1.2 and EE 1.1/1.2) operating systems. Language extensions for PC DOS and OS/2 will be available in March of 1990, to take full advantage of the unique error notification and orderly shut-down/start-up capabilities of the system. Five IBM PC software languages are supported. o IBM BASIC Compiler/2 o IBM C/2 o IBM FORTRAN/2 o IBM Macro Assembler/2 o IBM Pascal Compiler/2 The GEARBOX Model 800 includes a 300 total watt worldwide, autoranging power supply, which features 2 fans to assure system cooling. The Model 800 also provides for DC voltage start-up and operation through 1 of 2 optional External Voltage Modules (EVM). Operation at 24, 48, or 60V is supported. The selected EVM also provides the means for external battery back-up to assure continuity of system operation in the event of main power loss. An available internal battery will assure continuity of operation through brief main power disturbances, and also provide for an orderly shutdown period if main power is lost and no external battery back-up is in place. NOTE: Either the internal battery or an EVM (with connected external DC voltage source) must be ordered and installed to retain system set up information during periods when the system is shutdown. A Three Port Cable Assembly is included for connection from the System Resource Card in the system to various other standard connectors (serial, parallel, etc.). The standard system can be panel mounted. Rack mounting is available. Two configurations of the GEARBOX Model 800 are available. The configurations and brief content summary are as follows. Machine Type 7568 Model 040: o Frame and Backplane o Power Supply (300 Watts), autoranging, with function indicators o Processor Card with 4 MB of ECC memory (expandable to 8 MB using 2 MB Memory Expansion Kit, #5213), 32 KB of Cache Memory, and 80387 Math Co-Processor socket o System Resource Card with integrated VGA, serial and parallel ports, CMOS memory, and a real time clock o Keyboard and cable o Card Shrouds with indicator windows (empty in 7 slots) o Installation and Operation Guide with Diagnostic Diskette. NOTE: Initial set-up and loading of diagnostic software on the Model 040 requires the use of the Set-Up and Service Device (FC6230)(P/N33F7225) Machine Type 7568 Model 150: o Frame and Backplane o Power Supply (300 Watts), autoranging, with function indicators o Processor Card with 8 MB of ECC memory, 32 KB of Cache memory and 80387 Math Co-Processor socket o System Resource Card with integrated VGA, serial and parallel ports, CMOS memory, and a real time clock o Keyboard and cable o Disk Module (Disk/Diskette Adapter Card, with 0.5 MB DASD Cache Memory and Shroud) o 120 MB SCSI Disk Drive (3.5-inch) o 1.44 MB Diskette Drive (3.5-inch) o Card Shrouds with indicator windows (empty in 5 slots) o Installation and Operation Guide with Diagnostic Diskette. OPERATING SYSTEM STATEMENT OF DIRECTION IBM intends to provide a future Advanced Interactive Executive PS/2 (AIX (TM) PS/2) operating system enhancement that will support the GEARBOX Model 800. NEW FEATURES The GEARBOX Model 800 supports a number of new features, intended to provide the customer with flexibility in configuring a system for a particular application. All features can be installed by the customer. None are available for factory installation. BATTERY, NICAD (INTERNAL) (#6221) (15F8612) This internally mounted battery allows continuous operation through brief main power interruptions (nominal 1.5 seconds default). Also, if the interruption continues beyond this period, the battery maintains DC voltages to allow the system to perform an orderly shutdown. NOTES: 1. Either this battery or an EVM (#6231)(15F8613) or (6528)(33F7109) must be ordered and installed to retain system set up information during periods when the system is shut down. 2. Under hardware control the time for shutdown is limited to a maximum of 10 seconds. Control of shutdown may be conveyed to software, but even then, depending on the load on the power supply, the battery capacity, and thus the time for shutdown, may be limited to a 10 second period. If this is not adequate for the operating system and applications running on the system, the customer should provide external battery back-up, which requires an External Voltage Module (#6231 or #6528). DISK MODULE (WITH ADAPTER CARD) (#6222)(15F8605) The Disk Module allows for adding DASD to a Model 040. The Disk Module consists of a double-wide shroud and a Disk/Diskette Adapter Card, to be plugged into the Model 040 frame in place of 2 empty card shrouds. The Disk/Diskette Adapter Card contains 0.5 MB of DASD Cache Memory, and supports up to two 120 MB Disk Drives and a 1.44 MB Diskette Drive installed inside the shroud. The Disk/Diskette Adapter Card also contains an external SCSI interface for customer use. Use of this interface requires that the customer provide a software device driver for interface to the intended operating system. No such software device driver is provided with the system or feature. 120 MB DISK DRIVE (#6223)(15F8606) The 120 MB Disk Drive is the same as the drive that comes standard on the Model 150. The 120 MB Disk Drive can be used along with the Disk Module to provide a disk drive on the Model 040, or can be added to the Model 150 to provide a total of 240 MB of Disk Drive capacity. 16 BIT MICRO CHANNEL ADAPTER (#6224)(57F2543) @ The 16 Bit Micro Channel Adapter allows the plugging of selected 16 bit Micro Channel cards with a PS/2 form factor into the GEARBOX Model 800 frame. The Display Adapter 8514/A (#7161) must use the 16 Bit Micro Channel Video Adapter (#6225) for installation in the GEARBOX Model 800. (Note the list of PS/2 and other adapters that are supported on this system.) NOTE PS/2 adapters should not be installed in slot #9 position. This is due to limitations with setup and diagnostic code recognizing such adapters in that position. 16 BIT MICRO CHANNEL VIDEO ADAPTER (#6225)(15F8609) This 16 Bit Micro Channel Video adapter is required for installing the Display Adapter 8514/A (#7161) in the system. NOTE PS/2 adapters should not be installed in slot #9 position. This is due to limitations with setup and diagnostic code recognizing such adapters in that position. 1.44 MB DISKETTE DRIVE (SLIM-LINE) (#6229)(15F8528) The 1.44 MB Diskette Drive is the same as that which comes installed on the Model 150. The 1.44 MB Diskette Drive can be used along with the Disk Module (#6222) to provide diskette function on a Model 040. The Model 150 is limited to one diskette drive and can not accept the 1.44 MB Diskette Drive in addition to the already installed device. SETUP AND SERVICE DEVICE (#6230)(33F8915) The Setup and Service Device is a stand-alone 1.44 MB, 3.5-inch diskette drive and cable in an enclosure, which must be used during initial system set-up and to load diagnostics and record test results on a Model 040 (no DASD model). The cable plugs into a port on the System Resource Card. NOTE Due to the limitations on the diskette drive and media involved, this device is limited to physical environments that do not exceed 0 to 50 deg. C (32 to 122 deg. F), and which meet the reduced gaseous capabilities of the diskette media (See Technical Information section). This device is intended as a setup and service tool, and is not recommended for a continuous operating requirement. EXTERNAL VOLTAGE MODULES (#6231)(15F8613) AND (6528)(33F7109) These EVM features allow the connection of an external DC voltage source either for additional battery back-up to the main AC power, or as a main DC power source. EVM #6231 must be used when the external source is 24 volts. EVM #6528 must be used when the external source is 48 or 60 volts. No other external voltages are to be used as a main source or as a back-up. NOTE Either one of these EVMs (with connected external DC voltage source), or the internal nicad battery (#6221) must be ordered and installed to retain system set up information during periods when the system is shut down. CARD SHROUD (MACHINE TYPE 7568) (#6530)(15F8614) This Card Shroud is the same as those that come standard on the system. The Card Shroud permits installation of adapter cards in extra shrouds for immediate insertion in a GEARBOX Model 800 system, without having to dismantle an existing shroud/card assembly for replacement of the card in the shroud. The Card Shroud would also provide a means for a Model 150 to be converted to a Model 040 upon the removal of the Disk Module and insertion of 2 replacement card shrouds. NOTE The Card Shroud (#6530) is not compatible with the IBM 7552 Industrial Computer Processor or System Resource Cards due to different locations for indicators on the cards and in the shroud case. 80387 MATH CO-PROCESSOR (25 MHZ) (INDUSTRIAL) (#6532)(15F8607) The 80387 Math Co-Processor provides additional processing power and performance for application programs requiring many or repetitive arithmetic calculations. The 80387 conforms to the ANSI/IEEE floating-point standard, and runs most applications written for 80286/80287 and 8086/8087 based systems, unmodified. This option is installed in the Math Co-Processor socket on the Processor Card, and does not require an expansion slot. The 80387 Math Co-Processor (Industrial) has been modified to meet the environmental requirements of the GEARBOX system. SUPPORT TO PREVIOUSLY ANNOUNCED FEATURES The GEARBOX Model 800 supports the following previously announced features: Feat P/N Item # # ---- ----- -------- 2.0 MB Memory Module Kit (85 ns) 0604 6450604 Prototype Card 6094 85X2881 @ Filters 6096 60X9034 @ @ @ Keyboard Rack Mount Hardware without Keyboard 6193 90X6083 0-16 MB Extended Memory Adapter 6345 15F8603 @ Realtime Interface Co-Processor Multiport Interface Cable 6246 00F5531 Multiport/2 (0.5MB Memory) 6263 09F1896 @ Multiport/2 (1 MB Memory) 6369 16F1820 @ 8 Port RS-232-C Interface Board 6265 09F1885 RS-232-C/RS-422-A Interface Board 6266 09F1886 4 Port RS-232-C Interface Board 6267 09F1954 8 Port RS-422-A Interface Board 6326 15F8852 6 Port RS-232-C Synchronous Interface Board 0083 15F8861 Synchronous Interface Cable 6328 15F8866 Portmaster Adapter/A (0.5 MB Memory) 0620 53F2601 @ Portmaster Adapter/A (1 MB Memory) 5274 53F2604 @ Portmaster Adapter/A (2 MB Memory) 0623 53F2607 @ Eight Port RS-232 Interface Board/A 6362 53F2610 Eight Port RS-422 Interface Board/A 6363 53F2613 Eight Port Cable 6366 53F2619 Surge Protector Adapter 6361 53F2625 X.25 Interface Co-Processor/2 3130 07F3130 Cable Option X.21 3150 07F3150 Cable Option V.24 3160 07F3160 Cable Option V.35 0190 07F3170 Dual Asynch. Adapter/A 3033 6450347 PC Network Adapter II/A 6968 90X6969 @ PC Network Adapter II/A - Freq. 2 5647 96X6061 PC Network Adapter II/A - Freq. 3 5648 96X6066 PC Network Adapter II - Base Expander Cable 0230 6450230 - Short Distance Kit 0231 6450231 - Medium Distance Kit 0232 6450232 - Long Distance Kit 0233 6450233 - Cabling Segments: - 25 Foot 0234 6450234 - 50 Foot 0235 6450235 - 100 Foot 0236 6450236 - 200 Foot 0237 6450237 Token Ring Network 16/4 Adapter/A * 25F9528 * Feature code is dependent upon country NOTE: The GEARBOX Model 800 also supports the Token-Ring Bridge Program, Versions 2.0 and 2.1. 3270 Connection 7597 39X7597 @ Communications Adapter Cable 2067 1502067 Multi-Protocol Adapter/A 3043 6451003 Token Ring PC Adapter Cable 9088 6339089 @ Display Adapter 8514/A 7161 59X7161 Token Ring Network Adapter/A 4790 69X8138 Token Ring Network Adapter/A - Remote Program Load 8881 25F8887 System 36/38 Workstation Emulation Adapter/A 6275 92X6275 PC Network Baseband Adapter/A 6923 90X6967 @ Cabling System PC Network Baseband Cable 1227 1501227 PC Network Baseband General Purpose Cable 1228 1501228 PC Network Baseband Adapter Cable 1229 1501229 SUPPORTED MACHINE TYPES The GEARBOX Model 800 supports the following Machine Types. o 7544 Industrial Graphics Display o 7554 Industrial Graphics Display o 7525 Data Collection Terminal (PC DOS operating system only) o 7527 Data Collection Terminal (PC DOS operating system only). PUBLICATIONS The following publication will be shipped with the product. Contact your IBM Representative for availability of translated versions of the Manual. Title Installation and Operation Guide The following publications will be available for a price. To order and confirm availability of translated versions contact your IBM Representative. Title Maintenance Information Technical Reference Supported National Language versions of the following publications will be available approximately in April, 1990. Contact your local IBM Representative for information. Title Language Feature # Part Number --------------------------- -------- --------- ----------- Installation and Operation German 6520 33F8928 Guide French 6521 33F8929 Italian 6522 33F8930 Spanish 6523 33F8931 Maintenance Information German 6232 33F8920 French 6233 33F8921 Italian 6234 33F8922 Spanish 6235 33F8923 Technical Reference German 6236 33F8924 French 6237 33F8925 Italian 6238 33F8926 Spanish 6239 33F8927 EDUCATION SUPPORT Contact your Country IBM Marketing Representative for all applicable course information. TECHNICAL INFORMATION SPECIFIED OPERATING ENVIRONMENT PHYSICAL SPECIFICATIONS: Width - 482mm (19 inches) Depth - 256mm (10 inches) Height- 533mm (21 inches) Weight- Model 040 - 15.4 kg (34 pounds) - Model 150 - 19.1 kg (42 pounds) OPERATING ENVIRONMENT: Air Temperature: 0 to 60 degrees C (32 to 140 degrees F) Note: Because of the limitations of diskette media, when the GEARBOX Model 800 is configured with a diskette drive and has the media in the drive and operating, the air temperature limitation is 0 to 50 degrees C (32 to 122 degrees F). Also, the temperature maximum is reduced to 55 degrees C (131 F) with the filter option installed. The power supply fans must also be reversed when the filters are installed. Relative Humidity: 5 to 95 (percent) Non-condensing Wet Bulb: 29.4 degrees C (85 degrees F) Particulates: Limits with Optional Filters Installed: Suspended Particulates: 500 micrograms per cubic meter Benzene Soluble Organics: 30 micrograms per cubic meter Settleable Particulates: 1500 micrograms per square centimeter per 30 day period Limits without Optional Filters: Suspended Particulates: 200 micrograms per cubic meter Benzene Soluble Organics: 30 micrograms per cubic meter Settleable Particulates: 1500 micrograms per square meter per 30 day period Gases: Total Reactive Sulfur: 20 micrograms per cubic meter Sulfur Dioxide: 520 micrograms per cubic meter Nitrogen Dioxide: 141 micrograms per cubic meter Ozone: 98 micrograms per cubic meter (minimum) Acidic Gaseous Chlorine: 15 micrograms per cubic meter Note: The diskette media has lower gas limitations than the rest of the system. When the GEARBOX Model 800 is configured with a diskette drive, and has the media in the drive, the gas limits are as noted below. Total Reactive Sulfur: 3.2 ug/cm Sulfur Dioxide: 262 ug/cm Nitrogen Dioxide: 141 ug/cm Ozone: 98 ug/cm Acidic Gaseous Chlorine: 3 ug/cm Vibration/Shock: Vibration: - 5 to 10 Hz at 0.03 inches double amplitude displacement - 10 to 150 Hz at 0.15 G peak acceleration - 150 to 200 Hz decreasing from 0.15 G at 150 Hz to 0.077 G at 200 Hz peak acceleration - 200 to 500 Hz at 0.077 G peak acceleration. Shock: - 5 G 1/2 sine wave for 10 milliseconds duration. PROGRAMMING REQUIREMENTS An Operating System program must be provided. Language Extensions for the selected Operating System are recommended to take full advantage of the unique error notification and orderly shut-down/start-up capabilities of the GEARBOX Model 800 system. Supported Operating Systems: o IBM PC DOS 3.30 o IBM PC DOS 4.0 o IBM OS/2 Standard Edition 1.1 o IBM OS/2 Standard Edition 1.2 o IBM OS/2 Extended Edition 1.1 o IBM OS/2 Extended Edition 1.2 Available Language Extensions: o GEARBOX Language Extensions for PC DOS o GEARBOX Language Extensions for OS/2 USER GROUP REQUIREMENTS The GEARBOX Model 800 addresses numerous customer requests and satisfies partially requirements submitted by IBM User Groups. 1. Operating System/2 (OS/2) support for plant floor applications 2. 80386 processing capability and high capacity disk drives capable of operating in demanding environments (+60 deg. C) 3. Overall system capabilities needed to fully support the PLANT FLOOR SERIES Distributed Automation Edition products and other high function programs, in demanding environments with high system availability needs PLANNING INFORMATION CUSTOMER RESPONSIBILITIES The GEARBOX Model 800 is designated as customer setup. Installation, service, and programming publications are available. CABLE ORDERS A Three Port Cable Assembly is provided with each system. This cable provides a means for connection from the System Resource Card to various other standard connectors. The cable is included in each Ship Group. No other cables are required for system installation. NOTE: No line power cord is provided, as the system is direct wire, with customer-supplied cable. INSTALLABILITY Installation and setup of the GEARBOX Model 800 is described in the Installation and Operation Guide which is supplied with each system. Maximum installation time should be 2 hours for either model. Additional time will be required for installing additional features that may be desired. This assumes that the installation method has been previously defined, and that any additional hardware needed for that method (i.e. NEMA cabinet) is in place. PROBLEM DETERMINATION After installation, the customer should run the system-level diagnostic routine as described and provided in the Installation and Operation Guide, and proceed as directed in the guide. Additional diagnostic and defective part isolation assistance is available in the Maintenance Information publication, which may be purchased separately. PACKAGING Product Ship Group ---------------------------- ------------------------- IBM GEARBOX Model 800 Configuration as Ordered: Machine Type 7568 - Model 040 Installation and Operation Guide, Three Port Cable Assembly, RFI Filter Kit. or Machine Type 7568 - Model 150 (In a single box) ACCESSORIES AND/OR SUPPLIES Diskette media for the Model 150 Diskette Drive (2 MB, 3.5-inch) can be purchased separately. SECURITY, AUDITABILITY AND CONTROL The security and auditability features of this product consist of a keylock switch which will inhibit keyboard input, and the security and auditability features of the operating system software and application software. If additional physical security is required for the system, it must be customer supplied (for example, lockable NEMA enclosure or other technique to prevent media or part removal). User management is responsible for evaluation, selection and implementation of security features, administrative procedures and appropriate controls in application systems and communications facilities. TERMS AND CONDITIONS CHARGES Consult your IBM Marketing Representative. OFFERING This product is available from IBM under the Terms & Conditions for Purchase. VPA OFFERING The GEARBOX 800 is added to Category H in Exhibit 4 (WKSN) and Exhibit 7 (PC-Ed) The GEARBOX 800 is eligible under the Customer Fulfilment Option. WARRANTY The warranty period is: 12 Months. MAINTENANCE OFFERING IBM offers maintenance services as follows: IBM MAINTENANCE AGREEMENT On-Site Maintenance under the IBM Maintenance Agreement. Deferred Central Facility Maintenance Service (DCFM) is available as an option. The IBM Service/Exchange Repair Center Amendment does not apply. DEFERRED CENTRAL FACILITY MAINTENANCE SERVICE (DCFM) in conjunction with the Maintenance Agreement. DCFM machine category: 1 Machine DCFM point value: 0.5 Hours MAINTENANCE CHARGES: Annually. CUSTOMER SET-UP: Yes; Customer Set-up Allowance is: 1 Day. HOURLY SERVICE CLASS: Two TEST ALLOWANCE PRE INSTALLATION TEST ALLOWANCE: None. ON-SITE ALLOWANCE: None. EDUCATIONAL ALLOWANCE: Yes. Educational allowance will be available under the Terms and Conditions for IBM Volume Discount. A separate Exhibit for eligible institutions contains the applicable discounts. Academic Use Allowance is available. ***** END OF DOCUMENT *****